Technical Specifications P-3000 - Omnitronic P-125 Bedienungsanleitung

TECHNICAL SPECIFICATIONS P-3000

Power supply:
Power consumption (max.): 4500 W
Power output sine:
Stereo 4 Ohm
Stereo 8 Ohm
8 Ohms bridged
Frequency range:
Damping-factor:
Distortion factor:
Signal to Noise Ratio:
Channel seperation (at 1
KHz):
Min. input sensitivity:
Input impedance:
Slew-rate:
Input-connectors:
Output-connectors:
Control elements:
LED indicators (per
channel):
Protection circuits:
Construction:
Dimensions:
Weight:
Power/weight-relation:
Please note: Every information is subject to change without prior notice. 15.09.2005 ©
115/230 V AC, 50/60 Hz ~
2 x 1500 W
2 x 750 W
1 x 3000 W
40 - 40 000 Hz, +/- 3 dB
> 400
0.01 %
90 dB
70 dB
0.77 V/26 dB/1.4 V
20 kOhms (balanced)
60 V/µsec
2 x XLR-female-plug, 2 x 1/4"-jack-plug
2 x Speaker (stereo), 1 x Speaker (bridge),
2 x Banana/screw combination
Power switch, input attenuators (one per channel), Mode switch -
Stereo/Parallel/Bridged, Ground Lift, Input-Level-Select (0.77 V/26
dB/1.44 V), limiter
Power, Protect, Signal, Mode
Short-circuit, DC-protection-circuit, Thermal protection-circuit, Softstart
Steel chassis, aluminium frontpanel
510 x 482 x 136 mm
30 kg
50 W/kg
33/49 00008423.DOC VERSION 3.2