Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications P-125, P-250 & P-500 - Omnitronic P-125 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS P-125, P-250 & P-500
Power supply:
Power consumption
(max.):
Momentary music peak
power at 1 KHz:
Maximum power output:
Nominal power output:
Power output sine:
Stereo 4 Ohm
Stereo 8 Ohm
8 Ohms bridged
Frequency range:
Damping-factor:
Distortion factor:
Signal to Noise Ratio:
Channel seperation:
Min. input sensitivity:
Input impedance:
Output impedance:
Slew-rate:
Input-connectors:
Output-connectors:
Control elements:
LED indicators (per
channel):
Protection circuits:
Construction:
Dimensions:
Weight:
Power/weight-relation:
P-125
115/230 V AC, 50/60 Hz ~ 115/230 V AC, 50/60 Hz ~ 115/230 V AC, 50/60 Hz ~
250 W
200 W / 4 Ohms
2 x 70 W / 4 Ohms
2 x 65 W / 4 Ohms
2 x 65 W
2 x 40 W
1 x 125 W
22 - 31 000 Hz
> 150
0,01 %
108 dB
89 dB
0,77 V/26 dB/1,44 V
12 kOhms (unbalanced),
22 kOhms (balanced)
> 0,02 Ohms
> 35 V/µsec
2 x XLR-female-plug,
2 x 1/4"-jack-plug
2 x Speaker (stereo),
1 x Speaker (bridge),
2 x Banana/screw
combination
Power switch, input
attenuators (one per
channel), Mode switch -
Stereo/Parallel/Bridged,
Ground Lift, Input-Level-
Select (0.77 V/26 dB/1.44
V), limiter
Power, Protect, Signal,
Mode
Short-circuit, DC-
protection-circuit, Thermal
protection-circuit, Softstart
Steel chassis, aluminium
frontpanel
325 x 482 x 54 mm
6 kg
11 W/kg
P-250
500 W
400 W / 4 Ohms
2 x 140 W / 4 Ohms
2 x 125 W / 4 Ohms
2 x 125 W
2 x 75 W
1 x 250 W
22 - 31 000 Hz
> 150
0,01 %
108 dB
89 dB
0,77 V/26 dB/1,44 V
12 kOhms (unbalanced),
22 kOhms (balanced)
> 0,02 Ohms
> 35 V/µsec
2 x XLR-female-plug,
2 x 1/4"-jack-plug
2 x Speaker (stereo),
1 x Speaker (bridge),
2 x Banana/screw
combination
Power switch, input
attenuators (one per
channel), Mode switch -
Stereo/Parallel/Bridged,
Ground Lift, Input-Level-
Select (0.77 V/26 dB/1.44
V), limiter
Power, Protect, Signal,
Mode
Short-circuit, DC-
protection-circuit, Thermal
protection-circuit, Softstart
Steel chassis, aluminium
frontpanel
375 x 482 x 100 mm
9 kg
14 W/kg
31/49
P-500
1000 W
650 W / 4 Ohms
2 x 295 W / 4 Ohms
2 x 250 W / 4 Ohms
2 x 250 W
2 x 130 W
1 x 500 W
22 - 31 000 Hz
> 150
0,01 %
108 dB
89 dB
0,77 V/26 dB/1,44 V
12 kOhms (unbalanced),
22 kOhms (balanced)
> 0,02 Ohms
> 30 V/µsec
2 x XLR-female-plug,
2 x 1/4"-jack-plug
2 x Speaker (stereo),
1 x Speaker (bridge),
2 x Banana/screw
combination
Power switch, input
attenuators (one per
channel), Mode switch –
Stereo/Parallel/Bridged,
Ground Lift, Input-Level-
Select (0.77 V/26 dB/1.44
V), limiter
Power, Protect, Signal,
Mode
Short-circuit, DC-
protection-circuit, Thermal
protection-circuit, Softstart
Steel chassis, aluminium
frontpanel
445 x 482 x 100 mm
13 kg
19 W/kg
00008423.DOC VERSION 3.2

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

P-1000P-2000P-1500P-250P-3000P-500

Inhaltsverzeichnis