IKEA RUTINERAD Anleitung Seite 17

ENGLISH
Problem
The oven does not heat up.
The display shows Demo.
The display shows an error
code.
Steam and condensation
collect on the food and in
the oven.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
The demo mode is activa-
ted.
There is an electronic fault.
You left the dish in the oven
for too long.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the appli-
ance cavity.
Remedy
1. Deactivate the appli-
ance.
2. Press and hold the but-
ton +.
3. When an acoustic signal
sounds, turn the knob
for the oven functions to
the first function. Demo
flashes in the display.
4. Turn the knob for the
oven functions to the off
position.
5. Release the button +.
6. Turn the knob for the
temperature clockwise
three times. The acoustic
signal sounds three
times. The demo mode
is deactivated.
1. Deactivate the appli-
ance with the house
fuse or the safety switch
in the fuse box and acti-
vate it again.
2. If the display shows the
error code again, con-
tact the service centre.
Do not keep the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing ends.
.........................................
.........................................
.........................................
17