Product Description And Specifications; Intended Use; Product Features - Bosch PLR 50 Betriebsanleitung

OBJ_DOKU-27449-001.fm Page 17 Monday, July 18, 2011 10:31 AM
The measuring tool is delivered with a warning label in German language
(marked with the number 13 in the representation of the measuring tool
on the graphic page).
Before putting into operation for the first time, attach the supplied stick-
er in your national language over the German text on the warning label.
Do not direct the laser beam at persons or animals and do not stare into
the laser beam yourself. This measuring tool produces laser class 2 laser ra-
diation according to IEC 60825-1. This can lead to persons being blinded.
Do not use the laser viewing glasses as safety goggles. The laser viewing
glasses are used for improved visualisation of the laser beam, but they do not
protect against laser radiation.
Do not use the laser viewing glasses as sun glasses or in traffic. The laser
viewing glasses do not afford complete UV protection and reduce colour per-
ception.
Have the measuring tool repaired only through qualified specialists us-
ing original spare parts. This ensures that the safety of the measuring tool is
maintained.
Do not allow children to use the laser measuring tool without supervi-
sion. They could unintentionally blind other persons or themselves.
Do not operate the measuring tool in explosive environments, such as in
the presence of flammable liquids, gases or dusts. Sparks can be created
in the measuring tool which may ignite the dust or fumes.

Product Description and Specifications

Intended Use

The measuring tool is intended for measuring distances, lengths, heights, clear-
ances, and for the calculation of areas and volumes. The measuring tool is suita-
ble for measuring indoors and outdoors.

Product Features

The numbering of the product features shown refers to the illustration of the
measuring tool on the graphic page.
1 Length measurement button
2 Memory add button "M+"
3 Button for area and volume measurement
4 Memory retrieve button "M="
5 Button for indirect length measurement
6 Tracking (continuous measurement) button
7 On/Off and memory delete button
8 Memory subtraction button "M–"
9 Button for selection of the reference level
10 Display
11 Alignment aid
12 Measuring button
13 Laser warning label
Bosch Power Tools
English | 17
2 609 140 621 | (18.7.11)