Installation Recommendations And Notes About The Eq Settings - Silvercrest SMRS 30 A1 Bedienungsanleitung

SilverCrest SMRS 30 A1
The update process:

The update starts loading. The blue and green LEDs light up for approx. 15 seconds, then the
blue LED goes out for a second and then the blue and green LEDs flash during the download
(approx. 10-30 seconds).

Then the blue LED comes on for approx. 10 to 15 seconds.

Next, the device restarts and the update is installed. This is indicated by the blue and green
LEDs flashing (approx. 1-2 minutes).

After the update is finished, the device restarts. After the reboot, it is available in the
SilverCrest Smart-Audio App again, the blue LED is now lit constantly.
Important! Please note the following:
Do not interrupt the power supply to the device while the update is running. Please wait for the
update to complete. The entire process is automatic, you don't need to do anything.
If you have any questions regarding the update process, please contact our hotline, who will be
happy to help you.

Installation recommendations and notes about the EQ settings

A carefully chosen location of the speakers is important for obtaining a good sound. Furniture,
curtains and other objects already influence the sound slightly.
You should always try to install the speakers at the height of the listener's head.
In order to minimise any undesired sound reflections, a minimum clearance of 0.8 m behind and
aside of the speakers should be kept. You can check for any sound reflections by moving the
speaker closer and closer to a corner of the room. The bass component will raise the closer the
speaker is placed to the corner.
Negative sound reflection can also occur on the surface (shelve, chest of drawers, etc.) on which
the speaker is placed. There is already a difference in sound when placing the speaker on the front
edge of the furniture or in the centre of it.
Upon delivery, the sound is set for the installation conditions described above.
If you cannot find any location that meets the above requirements, you can still set the speaker
sound in order to optimise it for the given environment.
To do so, select the sound setting that best describes the location from the following list.
12 - English