Sony mex-bt5000 Installationsanleitung Seite 11

Card remote commander RM-X302
7
1
qs
4
qd
qf
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
qs ENTER button
To apply a setting.
qd Number buttons 15, 16, 17
To input numbers (phone number, passcode,
etc.).
Buttons 1 to 6 share the same functions as
the number buttons on the unit.
qf
button 17
qg M (+)/m (–) buttons
The same as pushing the joystick up/down.
qh < (.)/, (>) buttons
The same as pushing the joystick left/right.
qj VOL (volume) +/– buttons
To adjust volume.
qk
button 17
*1 When an MD changer is connected.
*2 When a Bluetooth audio device (supports AVRCP
of Bluetooth technology) is connected. Depending
on the device, certain operations may not be
available.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
3
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
6
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
qg
commander" on page 25.
qh
qj
qk
11