EuroLite DMX Scene Setter 24/48 Bedienungsanleitung Seite 20

16) AUDIO LEVEL SLIDER
Move to adjust the sensitivity of audio.
17) BLACK OUT KEY
The key will force all DMX to "0".
18) STEP KEY
Press it once and the program go one step.
19) AUDIO KEY
Press it to get into audio control.
20) HOLD KEY
Press and hold it, whole output will be hold.
21) PARK
In Chase-Scene mode, press it to select SINGLE CHASE or MIX CHASE. In DOUBLE PRESET
,pressing PARK B is same as MASTER B at the maximum.In SINGLE PRESET, pressing PARK A is
same as MASTER A at the maximum.
22) REC EXIT
Exit record. During the chaser-run, you can activate the Kill-function with this button.
23) RECORD KEY
Press it to record the step of program.
24) PAGE KEY
Press it to select desired SCENE program in appropriate page.
25) MODE SELECT
By pressing the key you can select Chase-Scenes DOUBLE PRESET or SINGLE PRESET.
26) DARK KEY
Press it to pause whole output, including FULL ON and FLASH.
27) ALL REV
The key, when activated, will revers chasing direction of all program.
28) 0% OR 0-255 KEY
Press it to select 0% or 0-255 on DISPLAY.
29) REV ONE
Pess and hold the key, then press any one of PRESET B the SCENE program will chase in reversed
direction.
30) CHASE REV
The key will reversed the SCENE program chase direction controlled by slider of speed.
31) BEAT REV
The key will reversed the SCENE program chase direction controlled by regular beat.
32) Fogger
To activate the fog machine.
Ready-LED
Heating-LED
Rear panel:
1) DC IN socket
2) Power switch
3) MIDI THROUGH socket
4) MIDI OUT socket
5) MIDI IN socket
6) DMX output socket
7) DMX POLARITY selector
8) AUDIO IN socket
9) REMOTE socket
10) Smoke machine socket
20/27 70064545_V_1_4.DOC