Setting The Current Limitation „Imax; Setting The Capacity Limitation „Pmax; Input Lock „Keylock - VOLTCRAFT 51 24 74 Bedienungsanleitung

Setting the current limitation „Imax"
The setting of the current limitation prevents an excess power output to
the connected consumer.
• For setting the current limitation, „IMax" must be displayed in the bottom
line. If this is not the case, press the button „Menu"(11) as long as this
function appears.
• With the rotary control (3), you set the desired current limit. The set value is indicated as „Imax" in the
second line of the display.
• The button „Select" (9) for the function „RST" effects the reset of the last saved value. If no value was
saved (button „OK" (10)), the factory setting is reset. Display „Restored".
• The button „Select" (10) for the function „OK" saves the current value. Display „Saved".
• The button „MENU" (11) switches to the next setting function.
Setting the capacity limitation „Pmax"
The setting of the capacity limitation enables the automatic adjustment of „Imax" (I = PU) with reference
to the preset voltage limitation „Umax".
• For setting the capacity limitation, „PMax" must be displayed in the bot-
tom line. If this is not the case, press the button „Menu"(11) as long as
this function appears.
• With the rotary control (3), you set the desired capacity limit. The set val-
ue is indicated as „Pmax" in the third line of the display.
• The button „Select" (9) for the function „RST" effects the reset of the last saved value. If no value was
saved (button „OK" (10)), the factory setting is reset. Display „Restored".
• The button „Select" (10) for the function „OK" saves the current value. Display „Saved".
• The button „MENU" (11) switches to the next setting function.
Input lock „Keylock"
The keys can be locked to prevent accidental activation. This lock also
includes the adjuster (3).
• For setting the input lock, „Keylock" must be displayed in the bottom line.
If this is not the case, press the button „Menu"(11) as long as this function
appears.
• The lock is activated with the button „Select" (10) for the function „OK".
The display briefly shows „Keyboard Locked"
25