Troubleshooting And Corrective Action; Disposal Of Cleaning And Servicing Substances; Technical Data - WALTHER PILOT PILOT WA 110 Betriebsanleitung

8

Troubleshooting and Corrective Action

Warning
Prior to any servicing and repair work: Make sure that the spray gun is in unpressuri-
zed condition, i.e. all air and material inputs must be shut off - if not, imminent Risk of
Injury.
Fault
Material nozzle or needle is dama-
ged
Gun is dripping
Material nozzle or needle is soiled
Piston spring (item 12) is broken
Needle seal (item 6) damaged
Material leaks behind
the needle seal
Level in material tank too low
Spray jet pulsating
Spray jet is one-side Air cap (item 1) is louled
9 Disposal of Cleaning / Servicing Substances
Disposal of any such substances must be in accordance with all applicable local and
national regulations, directives and laws.
Warning
Pay special attention to all processing specifications and warnings issued by the
manufacturer of spraying and cleaning media. The improper disposal of any toxic
waste material represents a serious thread to to environment, i.e. to the health of
mankind and animal life.
10

Technical Data

Weight:
Nozzle size:
Pressure ranges:
Atomizing air pressure
Control air pressure
Material pressure
max. operating temperature
Sound level,
(measured at a distance
of 1 m from the spray gun)
Right to effect technical changes reserved.
8
Cause Remedy
Replace
Clean
Replace
Replace
Top-up material
level
Clean
197,5 gr.
0,3 mm ø
max. 8 bar
min. 5 bar
max. 8 bar
80° C
83 dB(A)