Operation; Control Board; - Stand-Alone-Operation - EuroLite LED BC-7 Beam Effect with Dot Effect Bedienungsanleitung

OPERATION

After you connected the spot to the mains, the EUROLITE LED BC-7 Beam Effect starts running.
The device has two operating modes. It can be operated in stand-alone mode via the control board or the
remote control or in DMX-controlled mode via a standard DMX controller.

Control Board

The Control Board offers several features: you can e. g. easily set the starting address or change program
modes.
MODE UP DOWN SPEED
The LED BC-7 Beam Effect features a memory function. The last program selected will begin anew when the
device is restarted.

- STAND-ALONE-OPERATION

• Setting solid colors and brightness
Auto mode
•
Sound control mode
•
Slave mode
•
- REMOTE CONTROL OPERATION
- DMX OPERATION
Stand-Alone operation
In the stand-alone mode, the LED BC-7 Beam Effect can be used without controller.
Disconnect the LED BC-7 Beam Effect from the controller.
Setting Solid Colors and Brightness
Press the MODE button to select the solid color and brightness mode. When the Control Board shows r001,
you can select the desired brightness of the red LEDs via the UP or DOWN buttons (from 00 to 31 with
increasing brightness).
Additionally, by pressing the SPEED button you can set the speed of the step motor (Strobe effect).
Please press the MODE button to attain the main menu.
You can now set the desired brightness of the green and blue LEDs, as well as the speed of the step motor,
in the same manner.
The first digit on the Control Board shows the respective mode; the
second and third digits on the Control Board show the desired
settings; the fourth digit on the Control Board shows the speed of the
step motor.
Enter the menu by pressing the MODE-button. You can change the
selection by pressing UP or DOWN. By pressing the SPEED button,
you can set the desired speed of the step motor (9 steps with
increasing speed). You can leave every mode by pressing the
MODE-button. The functions provided are described in the following
sections.
20/24 00085014.DOC, Version 1.0