EuroLite LED BC-7 Beam Effect with Dot Effect Bedienungsanleitung Seite 21

Auto Mode
Press the MODE button to select the Auto mode. When the Control Board shows A011, you can select the
desired internal program via the UP or DOWN buttons (see following graphic).
By pressing the SPEED button you can set the speed of the step motor.
Please press the MODE button to attain the main menu.
Program:
01
RR, blinking
02 GY, blinking
03 BW, blinking
04 RRGY, blinking
05
RRBW, blinking
06 GYBW, blinking
07 RRGYB, blinking
08 R-R-G-Y-B-W, color change
09 RRBW-BWY-RRGY-RRBY, color change
10 GY-BW-RRGY-RRBW-GBYW-RRGBWY-
RR, color change
11 RR-RRGY-RRGBYW-BYW-BW-Blackout,
color fade
12 Endless loop: Strobe, static light, color
change, color fade
Sound Control Mode
Press the MODE button to select sound control mode. When the Control Board shows S011, you can select
the desired internal program via the UP or DOWN buttons (see following graphic).
By pressing the SPEED button you can set the speed of the step motor.
Please press the MODE button to attain the main menu.
Program:
01
RR, blinking
02 GY, blinking
03 BW, blinking
04 RRGY, blinking
05
RRBW, blinking
06 GYBW, blinking
07 RRGYB, blinking
08 R-R-G-Y-B-W, color change
09
RRBW-BWY-RRGY-RRBY, color change
10 GY-BW-RRGY-RRBW-GBYW-RRGBWY-
RR, color change
11 RR-RRGY-RRGBYW-BYW-BW-Blackout,
color fade
12 Endless loop: Strobe, static light, color
change, color fade
Slave Mode
Press the MODE button to select sound control mode. When the Control Board shows SLAv then the LED
BC-7 Beam Effect is in Slave mode and can be controlled by a Master LED BC-7 Beam Effect device
Now set the Master device to one of the stand-alone modes (Auto or Sound Control).
Function:
Function:
21/24 00085014.DOC, Version 1.0