Description Of The Device; Features - EuroLite LED BC-7 Beam Effect with Dot Effect Bedienungsanleitung

shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and device. The room must only be
saturated with an amount of smoke that the visibility will always be more than 10 meters.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
- - -m
The symbol
between light-output and the illuminated surface must be more than 0.1 meters.
In order to safeguard sufficient ventilation, leave 50 cm of free space around the device.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
The maximum ambient temperature T
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported. Make sure that you pack the device in
the original state.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.

DESCRIPTION OF THE DEVICE

Features

DMX LED beam effect provides spectacular mirror ball effects
Matt surface with clear lenses generate dotted beam performances
•
Equipped with bright red, green, blue, amber and white LEDs
•
10 to 50 rotations (180°) per minute produce circular light plays
•
Control via control panel, IR remote or any regular DMX512 controller (occupies 9 channels)
•
Infrared-remote control included in delivery
•
Sound-control via built-in microphone
•
Comfortable addressing and setting via control panel with 4-digit LED screen and four operating
•
buttons
Functions: stepless color change; color fade; internal programs; dimmer, strobe settings, rotation
•
direction and speed adjustable via stand-alone mode and via DMX; Master/Slave
Memory function
•
Plastic housing with mounting brackets
•
• Feed-through output allows to power up to 8 devices
• Switch-mode power supply for operation between 100 and 240 Volts
Ready for connection via enclosed power cord
•
determines the minimum distance from lighted objects. The minimum distance
= 45° C must never be exceeded.
a
16/24 00085014.DOC, Version 1.0