Environmental Friendliness - Siemens simovert masterdrives Betriebsanleitung

05.2005
10

Environmental Friendliness

Environmental
aspects during the
development
Plastics
components used
Environmental
aspects during
production
Environmental
aspects for disposal
Siemens AG 6SE7087-6NP85-0AA0
SIMOVERT MASTERDRIVES
The number of components has been significantly reduced over earlier
converter series by the use of highly integrated components and the
modular design of the complete series. Thus, the energy requirement
during production has been reduced.
Special significance was placed on the reduction of the volume, weight
and variety of metal and plastic components.
PC / ABS:
PA6:
PA6.6:
PBTP:
FORMEX:
Pocan:
FR4:
Halogen-containing flame retardants were, for all essential
components, replaced by environmentally-friendly flame retardants.
Environmental compatibility was an important criterium when selecting
the supplied components.
Purchased components are generally supplied in recyclable packaging
materials (board).
Surface finishes and coatings were eliminated with the exception of the
galvanized sheet steel side panels.
ASIC devices and SMD devices were used on the boards.
The production is emission-free.
The unit can be broken down into recyclable mechanical components
as a result of easily releasable screw and snap connections.
The plastic components are to DIN 54840 and have a recycling symbol.
After the service life has expired, the product must be disposed of in
accordance with the applicable national regulations.
Operating Instructions
Front cover MC Large
Front cover MC, terminal strips,
spacer bolts, fan impeller
DC link terminal cover,
through terminals, terminal strips,
terminal blocks
Fan housing
Insulating sheeting
Insulation bracket
Printed circuit board
Environmental Friendliness
10-1