VOLTCRAFT B8 Bedienungsanleitung Seite 87

Pb
Tension :
Tension de charge maxi. :
Courant de charge maxi. pour la charge rapide :
Arrêt automatique du courant de décharge à :
Si vous disposez de différents accumulateurs au lithium que vous souhaitez
recharger ou décharger au moyen du chargeur, il est nécessaire de régler le
bon type d'accumulateur (LiPo, Lilon, LiFe) avant leur raccordement.
En cas de choix du mauvais type d'accumulateur il est possible que
l'accumulateur explose ou s'enflamme !
110
2,0V/élément
2,46V/élément
0,4C (ou moins)
1,75V/élément (ou plus)
• With the "INC" button, you access the next setting (or with the button "DEC" the previous
setting). Return to the main menu with the button "Batt Type/Stop".
Capacity Cut-OFF Capacity Cut-OFF Capacity Cut-OFF Capacity Cut-OFF Capacity Cut-OFF
ON ON ON ON ON 5000mAh 5000mAh 5000mAh 5000mAh 5000mAh
Another safety function of the charger can terminate the charge process if a certain capacity
was "loaded" into the accumulator.
Briefly press the button "Start/Enter". "ON" (or "OFF") starts to blink in the bottom display line.
With the buttons "INC" or "DEC", you can select between "ON" (= safety cutoff activated) and
"OFF" (safety cutoff deactivated).
Save the setting by pressing the "Start/Enter" button.
Now the capacity starts to blink in the bottom line on the right.
With the buttons "INC" or "DEC", you can select the capacity (10 to 50000mAh). For a quick
adjustment, hold the corresponding button for a longer period of time.
Save the setting by pressing the "Start/Enter" button.
• With the "INC" button, you access the next setting (or with the button "DEC" the previous
setting). Return to the main menu with the button "Batt Type/Stop".
Key Beep Key Beep OFF OFF
Key Beep Key Beep Key Beep OFF OFF OFF
Buzzer Buzzer OFF OFF
Buzzer Buzzer Buzzer OFF OFF OFF
With the option "Button Beep", you activate/deactivate the confirmation beep at every push
of a button.
The option "Buzzer" switches the signal of functions/warning messages on or off.
Briefly press the button "Start/Enter". "ON" (or "OFF") starts to blink in the top display line.
With the buttons "INC" or "DEC", you can select between "ON" and "OFF".
Briefly press the button "Start/Enter" for saving. "ON" (or "OFF") starts to blink in the bottom
display line.
With the buttons "INC" or "DEC", you can select between "ON" and "OFF".
Save the setting by pressing the "Start/Enter" button.
87