Selecting 24-Hour Or 12-Hour Clock; Selecting The Level Display; Selecting The Display Mode While Using The Cd Changer (Only For Kd-Sx878R) - JVC KD-SX878R Bedienungsanleitung

Selecting 24-hour or 12-hour clock

You can change the clock built in this unit either to 24-hour system or 12-hour system.
1. Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2. Select "24H/12H" with
3. Select "24H" or "12H" with the control dial.
The clock alternates between 24-hour system and 12-hour system.

Selecting the level display

You can select the level display according to your preference.
When shipped from the factory, "AUDIO 2" is selected.
• AUDIO 1: Shows the audio level indicator and the equalization pattern indicator.
• AUDIO 2: Alternates "AUDIO 1" setting and illumination display.
• OFF: Erases the audio level indicator and the equalization pattern indicator.
1. Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2. Select "LEVEL" with
3. Select the desired mode with the control dial.
The level display setting changes as follows:
Selecting the display mode while using the CD changer
(ONLY FOR KD-SX878R)
You can change the initial indication on the display either to disc number or to elapsed playing
time, while using the CD changer.
1. Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2. Select "CH DISP" with
3. Select "DISC" or "TIME" with the control dial.
¢ or 4.
24H
¢ or 4.
AUDIO 1 AUDIO 2
¢ or 4.
DISC
12H
OFF
TIME
29