Inhaltsverzeichnis - JVC DT-V20L3G Bedienungsanleitung

DT-V24G1
DT-V20L3G
MULTI FORMAT LCD MONITOR
In the case that you use the monitor for many hours, we recommend that you set "NO
SYNC ACTION" in "SYNC FUNCTION" to "P.SAVE" in MAIN MENU. This will reduce power
consumption and relieve strain on the monitor.
The illustration of the monitor is of DT-V24G1.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock. Do
not remove cover (or back). No user
serviceable parts inside. Refer servicing
to qualified service personnel.
Safety Precautions .............................................. 2
Installation ............................................................ 4
Daily Operations / Connections ......................... 6
Menu Configuration-MAIN MENU .................. 12
Menu Configuration-SET-UP MENU ............... 16
External Control ................................................. 20
Troubleshooting ................................................. 24
Maintenance ....................................................... 25
Specifications .................................................... 26
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated "dangerous voltage"
within the product's enclosure that may
be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
INSTRUCTIONS
Table of Contents
IMPORTANT SAFEGUARDS ........................... 2
Front panel ....................................................... 6
Rear panel ........................................................ 8
Available signals ............................................. 10
About the external control .............................. 20
Using the MAKE/TRIGGER system ............... 20
Using the serial communication ..................... 22
Self-check program ........................................ 25
General ........................................................... 26
LCD panel ...................................................... 26
Input/output terminals ..................................... 26
Dimensions ..................................................... 27
ENGLISH