Installing The Bluetooth Adapter; When Installing The Microphone On The Sun - Pioneer AVIC-X1BT Installationshandbuch

Installation

Installing the Bluetooth adapter

Adhere the hard Velcro tape (provided) to the bottom of the Bluetooth adapter and adhere
the soft Velcro tape (provided) to the installation location.
Notes:
• Direct installation on the carpet is possible if the hard Velcro tape will adhere to the
carpet. Do not use the soft Velcro tape in this case.
• Thoroughly wipe off the surface before affixing the velcro tape.
When installing the microphone on the sun visor
1. Install the microphone on the microphone clip.
Microphone
2. Install the microphone clip on the sun visor.
With the sun visor up, install the microphone clip. (Lowering the sun visor reduces the
recognition rate for voice operations.)
Clamps
Use clamps to secure the
lead where necessary inside
the vehicle.
27
Bluetooth adapter
Velcro tape (hard)
Velcro tape (soft)
Vehicle mat or chassis
to Bluetooth adapter
Microphone clip
Microphone clip