Preparing For Use; Filling The Water Tank - Philips Azur Cordless HI575 Bedienungsanleitung

ENGLISH
8

Preparing for use

Fastening the stand clamp
C
1 Fold out the clamp on the bottom of the stand and fix the
stand clamp to the ironing board or to another stable surface,
such as a tabletop.
The rubber feet on the bottom prevent the stand from slipping.
◗ You can also place the stand on the ironing board without using
the clamp.The clamp can then remain folded in.
Do not place the stand close to the table edge, as the stand could
accidentally be knocked over.

Filling the water tank

1 Remove the mains plug from the wall socket.
2 Set the steam control to 0 (no steam).
C
Set the mode switch to ∫ (cordless ironing).
3
C
4 Take the iron from the stand.
5 Place the iron on its heel and open the cap of the filling
opening.
C
6 Use the filling cup to pour water into the water tank and close
the cap of the filling opening afterwards.
If the tap water in your area is very hard, we advise you to mix it with
an equal amount of distilled water or to use distilled water only.
Do not fill the water tank beyond the MAX indication.
Do not put perfume, vinegar, starch, descaling agents, ironing aids or
other chemicals in the water tank.