System Setup Items And Default Values - Denon AVR-1306 Bedienungsanleitung

System Setup
System setup items and default values (set upon shipment from the factory)
System Setup
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE
Speaker
1 for full-size, full-range) to automatically set the composition
Configuration
of the signals output from the speakers and the frequency
response.
This parameter is for optimizing the timing with which the
2 Delay Time audio signals are produced from the speakers and
subwoofer according to the listening position.
Subwoofer This selects the subwoofer speaker for playing deep bass
3
Mode signals.
Crossover Sets the frequency (Hz) below which the bass sound of
4
Frequency the various speakers is to be output from the subwoofer.
This adjusts the volume of the signals output from the
5 Test Tone speakers and subwoofer for the different channels in order
to obtain optimum effects.
Digital In This assigns the digital input terminals for the
6
Assignment different input sources.
Auto
7 Surround Auto surround mode function setting.
Mode
Ext. In SW
8 Sets the Ext. In Subwoofer channel playback level.
Level
Default settings
Front Sp. Center Sp.
Large Small
Front
Center
L & R
3.6 m 3.6 m
Subwoofer mode = Normal
180 Hz
Front
Center
L & R
0 dB 0 dB
Input
CD AUX
source
Digital
COAXIAL1 COAXIAL2
Inputs
Auto Surround Mode = ON
Ext. In SW Level = +15 dB
16
ENGLISH
Page
Subwoofer Surround Sp.
11, 12
Yes Small
Surround
Subwoofer
L & R
12
3.6 m 3.0 m
13
13
Surround
Subwoofer
L & R
14
0 dB 0 dB
DVD / VDP TV / DBS
15
OPTICAL1 OPTICAL2
15
15
ENGLISH
System Setup