KNF MOTOR M 56 EX
Fig. 6: Connection to the slotted
terminals
Fig. 7: Protective ground
lead connection
Translation of Original Operating- and Installation Instructions, english, KNF 121220-121648 09/17
5. Close the terminal box cover.
Keep the inside of the terminal box clean.
The seals must be unblemished and correctly seated.
6. Tighten the clamping screw (compression screw) on the cable
gland with a torque of 2.5 Nm.
7. Close open bores in the terminal box with certified plugs.
Installation and connection
15