Safety Instructions And Hazard Warnings - VOLTCRAFT NPI 150-12 Bedienungsanleitung

4. SAFETY INSTRUCTIONS AND HAZARD WARNINGS

The warranty will be void in the event of damage caused by failure to observe these
safety instructions! We do not assume liability for damage to property or personal injury
caused by improper use or the failure to observe the safety instructions!
This device left the factory in perfect condition in terms of safety engineering.
To maintain this condition and ensure safe operation, you, as the user, must comply with the safety
instructions and warnings contained in these instructions. The following symbols must be observed:
An exclamation mark in a triangle indicates important instructions which must be observed
within this document.
The "hand" symbol is used to indicate where specific hints and information on handling are
given.
This product has been CE-tested and meets the necessary European guidelines.
Earth potential
For safety and licensing reasons (CE), unauthorised conversion and/or modification of the device is not
permitted.
Electrical appliances and accessories are not toys and have no place in the hands of children.
The accident prevention regulations of the relevant trade associations for electrical systems and operat-
ing materials are to be observed in commercial institutions.
In schools and training centres as well as at hobby and DIY workshops, the use of power packs must be
supervised by adequately trained personnel in a responsible manner.
Always shut off the power supply when working on the inverter!
Please make sure that your hands, your shoes, your clothing, the floor and the device are dry.
Live components may be exposed if covers are opened or parts are removed unless this can be done by
hand.
Before opening, disconnect the device from all voltage sources.
Capacitors inside the device may still be charged, even if the device has been disconnected from all volt-
age sources.
18