Gastroback 42909 Bedienungsanleitung Seite 46

• Make sure the bowl chamber and the exterior of the ice cream bowl is completely
dry before inserting.
Note:
It is important that the paddle is properly assembled onto the drive shaft to ensure
ingredients are mixed.
C
process. The elapsed time will be displayed on the LCD.
4. The appliance will beep when your dessert has reached its desired consistency.
PRE-COOL
Note:
PRE-COOL can only be operated in the stand by mode, before pressing start can-
cel button.
a) PRE-COOL lowers the temperature of the ice cream machine to reduce the time
it takes to prepare your dessert. It is optional and is ideal to use while you are pre-
paring your ice cream base before churning.
b) To select PRE-COOL function, press the PRE-COOL button. The light surrounding
the button will turn from white to red to indicate that the machine is in PRE-COOL
mode.
This mode will PRE-COOL the machine to approximately -10°C to -30°C, taking
about 5-10 minutes. READY will illuminate and PRESS START will flash on the LCD
screen when the ice cream maker has reached optimal temperature.
The paddle will start turning after 15 minutes has passed, but will not start making
the frozen dessert unless the START | PAUSE button is pressed.
In this function, the LCD screen will display the temperature, PRE-COOLING will
illuminate and the progress indicator will scroll, to let you know that you are in this
mode.
c) PRE-COOL will return to standby after 20 minutes or alternatively can be swit-
ched off either by pressing PRE-COOL button again or pressing the START | PAUSE
button which will override the pre-cooling mode.
46
1. To lock the lid into position, align the lid handle to the
alignment graphic, rotating clockwise into the LOCK positi-
on. (pic C)
2. Press the POWER button to turn the machine on.
3. Rotate the hardness selection dial to your chosen des-
sert. Press the START | PAUSE button to begin the churning