Digital.gauge.mode - Talis IQ-1201 Benutzerhandbuch

DIGITAL GAUGE MODE (GAUG)
When GAUG is selected as the operating mode, the Talis will operate as a Digital Depth Gauge/Timer without performing nitro-
gen and oxygen calculations.
• M (2 sec), while viewing the NORM Surface Main - to access Gauge Surface Mani.
• M (< 2 sec), while the graphic GAU is flashing - to select GAUG as the operating dive mode. The graphic GAU becomes
solid and Gauge Mode is selected.
• If no Gauge dive has been conducted, M (2 sec) will access Free Surface Main.
GAUG Surface Main, information includes (Fig. 81):
> Surface Interval Time (hr:min) with clock/wave icon.
> Graphic GAU.
> Number of the recent dive conducted, 0 if no dive yet that period, with # icon.
> Battery icon if a Low Battery, flashing if Too Low.
• A (< 2 sec) - to access Log, then History.
• A (2 sec) - to access SURF ALT.
• A + S (2 sec) - to access the Set Modes.
• S (< 2 sec) - to access Time to Fly, if a dive was conducted.
• L (press) - to activate the Backlight.
GAUG Surface ALT, information includes (Fig. 82):
> Temperature with °F (or °C).
> Time of Day (hr:min) with Time (clock ) icon, and AWAY icon if Alternate is selected as the Watch Default Time.
> Altitude graphic (EL2 to EL7), if above 3000 feet (915 meters), blank if below.
• A (< 2 sec) - to revert to the Surface Main, or after 5 seconds if A is not pressed.
• L (press) - to activate the Backlight.
GAUG Dive Main information includes (Fig.83):
> Graphic GAU.
> Elapsed Dive Time (hr:min) with wave/clock icon.
> Current Depth with FT (or M) icon.
> ASC, when ascending.
• A (< 2 sec) - to access Dive ALT.
• S (< 2 sec) - to acknowledge/silence Alarms.
• L (press) - to activate the Backlight.
GAUG Dive ALT information includes (Fig. 84):
> Temperature with °F (or °C).
> Time of Day (hr:min) with Time (clock ) icon, and AWAY icon if Alternate is selected.
> Max Depth with MAX and FT (or M) icons.
• A (< 2 sec) to revert to the Main, or after 5 seconds if A is not pressed.
• L (press) to activate Backlight.
If you descend deeper than the MOD (Max Operating Depth) of 330 FT (99.9 M), Delayed Violation 3 (DV3) will be activated.
DV3 Main, information includes (Fig. 85):
> Graphic GAU.
> EDT (hr:min) with wave/clock icon.
> Up Arrow icon (flashing).
> Depth as 3 dashes ( - - - ) flashing with FT (or M) icon.
> ASC, if ascending.
• A (< 2 sec) - to access Dive ALT.
• S (< 2 sec) - to acknowledge/silence Alarms.
• L (press) - to activate the Backlight.
©2002 Design, 2014
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
37
TALIS
OWNER'S MANUAL
Fig. 81 - GAUG SURF MAIN
Fig. 82 - GAUG SURF ALT
Fig. 83 - GAUG DIVE MAIN
Fig. 84 - GAUG DIVE ALT
Fig. 85 - GAUG DV3 MAIN
Doc. No. 12-5355-r01 (1/20/14)