Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Set CDT, information includes (Fig. 9B):
> Graphics CDT and SEt.
> Timer setting (hr:min), with Hour digits flashing.
• S (hold) - to scroll upward through Hour values (8/sec) from 0: to 23: in increments of 1: (hr).
• A (< 2 sec) - to step upward through Hour values one at a time.
• M (< 2 sec) - to step back (down) through Hour values one at a time.
• A (< 2 sec) - to save the Hour setting and flash the Minute digits.
• S (hold) - to scroll upward through Minute values (8/sec) from :00 to :59 in increments of :01 (min).
• S (< 2 sec) - to step upward through Minute values one at a time.
• M (< 2 sec) - to step back (down) through Minute values one at a time.
• A (< 2 sec) - to save the hr:min setting and revert to the CDT Status screen with the graphic OFF flashing.
• M (2 sec) - to revert to the Watch Default Time screen.
• Revert to Watch Default Time after 2 minutes if no button is pressed.
• L (press) - to activate the Backlight.
CHRONOGRAPH (Stop Watch/Lap Timer), information includes (Fig. 10A - 10C):
> Graphic CHR.
> Elapsed run time counting up to 9:59:59.99 (min:sec_ .01 sec) if previously started with clock icon; 0:00:00.00 flashing if
not yet started or after reset. After the first 4.99 seconds, the .01 digits display 2 dashes ( . - - ).
> Graphic LAP #1 (up to #9) when running, blank if not started.
• S (< 2 sec) - to start the Timer which begins counting up in increments of .01 sec.
• S (< 2 sec) - to save that Lap's time and display the next Lap (up to #9, then restart with #1) with the Timer continuing to
count up until stopped.
• A (< 2 sec) - to stop the Timer, save the Lap in progress (the final Lap) and total elapsed run time*, then recall LAP #1 (up to
#9) with it's time (Fig. 10C). Repeat to recall other Lap times.
• A (2 sec), after the timer is stopped - to revert to Chrono Status with run time reset to 0:00:00.00 flashing.
• A (2 sec) - to step back from the Chrono Status sceen to the CDT Status screen.
• M (< 2 sec) - to access Daily Alarm Status.
• M (2 sec) - to revert to Watch Default Time.
• L (press) - to activate the Backlight.
While the Chrono is running, it will remain on the screen until a button operation is performed. If another screen is accessed, it
will then continue to run in the background.
Upon descending on a dive, Chrono operation will be terminated and reset to 0:00:00.00.
DAILY ALARM STATUS, information includes (Fig. 11A):
When set ON, the Daily Alarm will sound the Audible Alarm at the Time set every day.
> Graphic AL and clock icon
> Graphic ON (or OFF), flashing.
> Alarm Time previously set (hr:min) with AM (or PM) icon.
• S (< 2 sec) - to toggle between ON and OFF.
• A + S (2 sec) - to access Set Daily Alarm.
• A (2 sec) - to step back to Chrono Status.
• M (< 2 sec) - to step forward to Watch Default Time.
• M (2 sec) - to revert to the Watch Default Time screen.
• Revert to Watch Default Time after 2 minutes if no button is pressed.
• L (press) - to activate the Backlight.
Set Daily Alarm, information includes (Fig. 11B):
> Graphics AL and SEt with clock (alarm) icon.
> Alarm Time previously set (hr:min) with the Hour digits flashing.
• S (hold) - to scroll upward through the Hour values 8/sec in increments of 1: (hour).
• S (< 2 sec) - to step upward through the Hour values one at a time.
• M (< 2 sec) - to step back (down) through the Hour values one at a time.
• A (< 2 sec) - to save the Hour setting and flash the Minute digits.
• S (hold) - to scroll upward through the Minute values 8/sec in increments of :01 (minute).
• S (< 2 sec) - to step upward through the Minute values one at a time.
• M (< 2 sec) - to step back (down) through the Minute values one at a time.
• A (< 2 sec) - to save the Minute setting and revert to the Status screen with OFF flashing.
• M (2 sec) - to revert to the Watch Default Time screen.
• Revert to Watch Default Time after 2 minutes if no button is pressed.
• L (press) - to activate the Backlight.
©2002 Design, 2014
10
TALIS
OWNER'S MANUAL
Fig. 9B - SET WATCH CDT
Fig. 10A - CHRONO STATUS
Fig. 10B - CHRONO
RUNNING
Fig. 10C - LAP RECALL
Fig. 11A - DAILY ALARM
STATUS
Fig. 11B - SET DAILY ALARM
Doc. No. 12-5355-r01 (1/20/14)
Werbung
Kapitel
Inhaltsverzeichnis
