Herunterladen Inhalt Inhalt Diese Seite drucken

Watch.mode.settings; Set.date.format; Set.hour.format; Set.time.of.day - Talis IQ-1201 Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

WATCH MODE SETTINGS
Sequence of selections - - Date Format >> Hour Format >> Time >> Date >> Alt Time >> Default Time >> Show Dual.
• A (< 2 sec), repeatedly - to step forward through the selections.
• A (2 sec), repeatedly - to step back through the selections. This action will not save changes to settings.
• M (2 sec), at any time - to revert to the Watch Default Time screen. This action will save a flashing set point.
• Revert to Watch Default Time after 2 minutes if no button is pressed. This action will save a flashing set point.
• L (press) - to activate the Backlight.
> Time of Day and Date settings will serve as the basis for Watch Main, Alternate, and Dual Time values.
> Day of the Week is set automatically when the Date is set.
Set Date Format, information includes (Fig. 12):
This setting determines whether Day is shown on the right or left of Month when Date is displayed.
> Graphic M - D (or D - M) flashing.
> Graphic dAtE.
• S or M (< 2 sec) - to toggle between M - D and D - M.
• A (< 2 sec) - to save the setting and access Set Hour Format.
• A (2 sec) - to step back to the Watch Default Time screen, without changing the setting.
Set Hour Format, information includes (Fig. 13):
This setting determines whether Time of Day is displayed as 1 through 12 hours Am and Pm, or 1 through 24 hours.
> Graphic HR.
> Graphic 12 (or 24) flashing.
• S or M (< 2 sec) - to toggle between 12 and 24.
• A (< 2 sec) - to save the setting and access Set Time of Day.
• A (2 sec) - to step back to Date Format, without changing the setting.
Set Time of Day, information includes (Fig. 14):
This setting will serve as the basis for Watch Main Time, Alternate Time, and Dual Time hr:min values.
> Graphic SET.
> Time with Hour digits flashing, clock icon, AM (or PM) icon if 12 Hour Format.
• S (press/hold) - to scroll upward through the Hour set points 8/sec in increments of 1: (1 hour).
• S (< 2 sec) - to step upward through the Hour set points one at a time.
• M (< 2 sec) - to step back (down) through the Hour set points one at a time.
• A (< 2 sec) - to save the Hour setting and flash the Minute digits.
• A (2 sec) - to step back to Set Hour Format, without changing the setting.
• S (press/hold) - to scroll upward through the Minute set points 8/sec in increments of :01 (1 minute).
• S (< 2 sec) - to step upward through the Minute set points one at a time.
• M (< 2 sec) - to step back (down) through the Minute set points one at a time.
• A (< 2 sec) - to save the Time setting and access Set Date.
• A (2 sec) - to step back to the Hour digits flashing, without changing the setting.
Set Date, information includes (Fig. 15):
Year is always set first, then Month, then Day, regardless of their positions on the screen.
> Graphic YMD meaning Date is arranged as Year Month.Day, or YDM meaning Date is arranged as Year Day.Month.
> Year, Month.Day (or Year, Day.Month) with the Year digits flashing.
• S (press/hold) - to scroll upward through the Year set points 8/sec from 2013 to 2056 in increments of 1 year.
• S (< 2 sec) - to step upward through the Year set points one at a time.
• M (< 2 sec) - to step back (down) through the Year set points one at a time.
• A (< 2 sec) - to save the Year setting and flash the Month digits.
• A (2 sec) - to step back to Set Time of Day, without changing the setting.
• S (press/hold) - to scroll upward through the Month set points 8/sec from 1 to 12 in increments of 1 month.
• S (< 2 sec) - to step upward through the Month set points one at a time.
• M (< 2 sec) - to step back (down) through the Month set points one at a time.
• A (< 2 sec) - to save the Month setting and flash the Day digits.
• A (2 sec) - to step back to the Year digits flashing, without changing the setting.
• S (press/hold) - to scroll upward through the Day set points 8/sec from 1 to 31 in increments of 1 day.
• S (< 2 sec) - to step upward through the Day set points one at a time.
• M (< 2 sec) - to step back (down) through the Day set points one at a time.
• A (< 2 sec) - to save the Date setting and access Set Alternate Time.
• A (2 sec) - to step back to the Month digits flashing, without changing the setting.
©2002 Design, 2014
11
TALIS
OWNER'S MANUAL
Fig. 12 - SET DATE FORMAT
Fig. 13 - SET HOUR FORMAT
Fig. 14 - SET TIME of DAY
Fig. 15 - SET DATE
Doc. No. 12-5355-r01 (1/20/14)

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Tusa

Inhaltsverzeichnis