Herunterladen Inhalt Inhalt Diese Seite drucken

PROUSER IBC25000 Bedienungsanleitung Seite 9

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The IBC25000 battery charger will NOT start charging, without the correct voltage and
a charging mode being selected.
1. Before charging the battery, connect the output terminals of the charger to the battery. Make sure
all connections are tight and clean.
2. Make sure to choose the correct voltage by pressing the 12V/24V button. A faulty selecting can
cause problems and damages to your battery and car. Please see also your car´s manual for
determining the right voltage.
3. After voltage selection, select the desired mode. Settings are made by pressing the "MODE-button"
and stepping forward by pressing the button one step at a time, releasing the button when the
required mode is reached. After that choice the charger should start the charging process.
4. Continue charging the battery until the LCD display shows "FUL".

Stopping the Charging Process
Charging can be stopped at any time by disconnecting the supply cord or by pressing the MODE-button.
After Charging
WARNING! Disconnect the supply before making or breaking the connections to the
battery. As the released gas is flammable, avoid naked flames, glowing or electrostatically
charged material and sparks in the vicinity of the battery. Always provide adequate
ventilation. Because of this risk of explosive gas, only connect and disconnect the battery
leads when the mains supply is disconnected.
1. Unplug charger from the mains supply
2. Disconnect the negative charging lead (BLACK) from the negative post of the battery
(marked -) or mass.
3. Disconnect the positive charging lead (RED) from the positive terminal post of the battery
(marked +).
4. Clean and store battery charger.
If the charged battery is maintainable, wait some time until the bubbling stops. Inspect the liquid in each
cell again and top up carefully with de-ionized or distilled water if necessary. Now replace the caps. Any
surplus fluid around the cell tops should be wiped off carefully as it may be acidic. Avoid getting
electrolyte on your skin or clothes. Use eye protection. Wash your hands carefully.
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis