Centering And Clamping Means; Mid Centering Device - Nussbaum BM 15 Touch Bedienungsanleitung

Attach the outer gauge arm as shown on the screen to
the tip of the calibration weight and wait for an acoustic
signal.
Bring both gauge arms to their home position and wait
for an acoustic signal.
The calibration of the gauge arms is finished
AD W9002 N 12.08.2013
7

Centering and clamping means

!
Suitable centering and clamping means are re-
quired to fix a wheel onto the balance machine. It
should be clean and undamaged in order to ena-
ble a high accuracy when balancing a wheel.
7.1

Mid centering device

(Extend of delivery)
For all car wheels with a hole in the centre and which
therefore are able to be clamped using the centering
and clamping means provided with the machine.
The scope of delivery includes 3 centering cones for rims
with a centre bore of between 42 mm and 111 mm.
Further cones and centering means are available as
special accessories for larger type wheels such as those
for SUVs and transporters.
056
!
Important to note that only when dismounting the
complete centering means is it important to re-
mount it in the correct position i.e. with the red in-
dication mark (20) on the main shaft in line with the
threaded hole for the calibration weight.
057
20
058
53