Nussbaum BM 15 Touch Bedienungsanleitung Seite 47

Below the green arrows a bar appears that changes co-
lor the closer you get to the position where to attach the
weights from
As soon as the bar turns green an audible beep is heard
and you can attach the weight by pushing the arm up
to the rim. The weight is then attached at the right po-
sition.
RIGHT CORRECTION PLANE
Touch the POS button and the wheel is
turned automatically to the outer cor-
rection plane
The wheel is positioned in the „12 o´ clock position"
shown by the green arrows.
Place the adhesive wheel weight on the head of the
gauge and remove the adhesive film. With adhesive
weights made of steel the weight is hold on the head by
means of a magnet.
Move the gauge arm from its home position.
AD W9002 N 12.08.2013
to .
035
038
Below the green arrows a bar appears that changes co-
lor the closer you get to the position where to attach the
weights from
As soon as the bar turns green an audible beep is heard
and you can attach the weight by pushing the arm up
to the rim. The weight is then attached at the right po-
sition.
to .
039
47