Time; Language; Default Values Calibration; Unit For Wheel Data - Nussbaum BM 15 Touch Bedienungsanleitung

5.1.3

Time

If the area for the time (21) is touched a number field
appears and the time can be input.
21
5.1.4

Language

After touching the area language and after that the
actual language a new screen appears showing all the
various languages available. Touch the language you
like to set the balancer
Picture shows the languages available at the time of printing
AD W9002 N 12.08.2013
5.1.5

Default values calibration

The calibration values that have been stored in the fac-
tory are taken over.
!
This function is useful when changes have been
made to the machine that have been faulty. In or-
der to secure a good accuracy of the machine it is
recommended to perform a new machine calibra-
tion
5.1.6

Unit for wheel data

The unit for wheel data can be set to INCH or MM.
5.1.7 Measurement units of the imbalance rea-
dings
044
The unit for imbalance readings can be set to GRAM or
OUNCES.
5.1.8

Rounding off

The following rounding can be set: 1 - 5 - 10.
Rounding off will display the balance results in multiples
of 5 grams e.g. 32 grams are shown on the display as 30
grams 33 grams are shown as 35 grams.
5.1.9

Suppression

The following suppression can be set: 3 - 5 - 10.
By suppressing the minor unbalance readings to 5 any
results less than 5 grams will be shown as 0.
045
49