Ordering Accessories Saeco; Guarantee And Support - Saeco Intelia Deluxe HD8902 Installationsanleitung

3 - 4
5
Other error codes

Ordering accessories Saeco

Typenumber
CA6700
CA6903
HD5061
CA6704
CA6705

Guarantee and support

The brew group cannot
be removed.
Water circuit problem
If the above solutions do not help to remove the error code icon from the
display and bring the machine back to normal working order, contact the
Philips Saeco hotline. Contact details can be found in the warranty booklet
or on www.saeco.com/support.
To clean and descale the machine, only use the Saeco maintenance
products. These products can be purchased in the Philips online shop (if
available in your country) at www.shop.philips.com/service, from your local
reseller or from the authorized service centers.
Ordering maintenance products:
If you need information or support, please visit www.saeco.com/support or
read the separate guarantee leaflet.
If you need information or support, please contact the Philips Saeco hotline
in your country. Contacts are included in the warranty booklet supplied
separately or visit www.saeco.com/support.
The brew group is not
positioned correctly.
There is air in the water
circuit.
Product
Descaling solution
AquaClean filter
Brew group grease
Degreasing tablets
Milk circuit cleaner
English
Close the maintenance
door. Switch the
machine off and back
on again. Wait for the
'machine ready' icon on
the display and then
remove the brew group.
Remove and place back
the water tank a couple
of times. Make sure you
insert it into the
machine properly.
Check if the water tank
compartment is clean.
Switch the machine off
and switch it back on
again after 30 seconds.
Try this 2 or 3 times.
19