Aquaclean Filter; Aquaclean Filter Installation - Saeco Intelia Deluxe HD8902 Installationsanleitung

AquaClean filter

AquaClean filter installation

ON
A Q U A
CLEAN
OFF
0/8
6 Press the HOT WATER button. Hot water dispensing starts automatically.
Dispense water until the display shows the no water icon.
7 Fill the water tank with fresh water up to the MAX level and remove the
container.
The machine is ready for use.
The AquaClean filter is designed to reduce limescale deposits in your coffee
machine and provide filtered water to preserve the aroma and flavor of each
cup of coffee. If you use a series of 8 Aquaclean filters as indicated in this
user manual, you don't have to descale your machine for 5000 cups (with a
capacity of 100 ml).
Your machine has to be completely limescale-free before you start to use
the AquaClean filter. If you did not activate the filter upon first use and
brewed more than 50 cups (with 100 ml capacity), you need to descale the
machine before you activate the filter.
1 Remove the AquaClean filter from its packaging. Shake the filter for about
5 seconds.
2 Immerse the filter upside down in a jug with cold water and wait until no
more air bubbles come out.
3 Remove the water tank from the machine and insert the filter vertically
onto the filter connection.
4 Fill the water tank with fresh water and slide it back into the machine.
5 Press the MENU button and scroll to the AquaClean filter option. Then
press the OK button to select the AquaClean filter option.
If you are installing the filter at first time use, follow the steps in chapter
'First installation'.
6 Select ON on the display and confirm the activation by pressing the OK
button.
English
11