Key Tone On/Off; Clock; Minutes Conversation Timer; Setting Pause Time - Topcom Butler 100 Bedienungsanleitung

8.9.2. ACTIVATE BABYCALL
1 xxxx 41
The babycall symbol appears on the display.
When you press a button (except the set button
ber is dialled automatically.
8.9.3. DEACTIVATE BABYCALL
1 xxxx 40
The babycall symbol disappears from the display.

8.10. KEY TONE ON/OFF

Standard the Butler 100 is set to sound a beep each time you push a button. This can
be deactivated as follows:
1 xxxx 50
To activate the key tones again, proceed as follows:
1 xxxx 51

8.11. CLOCK

The display of the handset is provided with a clock. You can set this clock as follows:
1 xxxx 00
On the handset the time now appears in hours-minutes-seconds.
The correct time can be set as follows:
to change the hours, press
to change the minutes, press .
Press the set button to confirm and end this setting.
16
), the programmed babycall num-

8.12. 15 MINUTES CONVERSATION TIMER

To avoid that you would forget to end a conversation or that you accidentally press
the line button without having a conversation, you have the possibility to activate a
15 minutes conversation timer. This warns you after 15 minutes of conversation by
means of 10 beeps. To continue your conversation and to avoid the connection from
being broken automatically, press a numerical button (0-9) as soon as you hear the
first beeps.
To activate this function, proceed as follows:
1 xxxx 31
This function can also be deactivated again in the following way:
1 xxxx 30

8.13. SETTING PAUSE TIME

If your Butler 100 is connected to a house telephone exchange, we advise you to pro-
gram a pause in the memory numbers after asking access to the external line (see
8.7.1. Storing memory numbers).
2 xxxx 31
(for 1 second pause time)
2 xxxx 32
(for 2 seconds pause time)
2 xxxx 33
(for 3 seconds pause time)
2 xxxx 34
(for 4 seconds pause time)
If you wish to insert a pause when saving a memory number, just press the rediall
button . The pause will last as long as you have programmed it to be.

8.14. SETTING RINGER VOLUME

The ringer volume of the base station can be set by means of a ringer volume switch
on the right side of the base station. This switch allows you to turn off the ringer
volume completely (position I) or to set the volume (position II= silent, position III=
l o u d ) .
17