Call Barring (Electronic Lock); Babycall (Emergency Call) - Topcom Butler 100 Bedienungsanleitung

OR
1. Press the memory button ("SPEED DIAL" appears on the display).
2. Press the number of the memory place where the telephone number has been
stored (0-9). The display shows the telephone number.
3. Press the line button . The telephone number is dialled automatically as
soon as the radio connection between the base station and the handset is
established.
8.7.3. SEARCHING A MEMORY NUMBER
1. Press the memory button ("SPEED DIAL" appears on the display).
2. Press the memory button again
by the telephone number appears on the display.
3. Each time you press the memory button
following memory number, each time followed by the corresponding
telephone number.
4. When you have found the desired telephone number, press the line button
The telephone number is now dialled automatically.
8.7.4. ERASING A MEMORY NUMBER
1. Press the set button .
2. Press the memory button .
3. Press the number of the memory place (0-9) of the memory number you wish
to erase.
4. Press the set button .
14
. The memory number f.i. '1-' followed
, the display shows the
.

8.8. CALL BARRING (ELECTRONIC LOCK)

The numerical buttons of the Butler 100 (except the set button
electronically so that outgoing calls are not possible any more.
8.8.1. ACTIVATE CALL BARRING
1 xxxx 11
The key symbol appears on the display.
R e m a r k :
If the Butler 100 is connected to a telephone exchange, incoming lines can still be
transferred, even when the electronic lock has been activated.
8.8.2. DEACTIVATE CALL BARRING
1 xxxx 10
The key symbol on the display disappears.

8.9. BABYCALL (EMERGENCY CALL)

Thanks to the babycall function you can program the Butler 100 so that a prepro-
grammed telephone number is dialled automatically when pressing any button,
except the set button.
8.9.1. ENTERING A BABYCALL NUMBER
1 xxxx 42
1. Dial:
2. "b-" appears on the display.
3. Enter the desired telephone number.
4. Press the set button .
15
can be locked