VOLTCRAFT IPC-3 Bedienungsanleitung Seite 30

Display Parameter
The capacity is displayed.
The runtime of the rechargeable
battery programme is displayed.
The rechargeable battery is
charged completely.
No measured value has been
determined yet. Wait until
the rechargeable battery pro-
gramme has been completed.
The dynamic inner resistance of
the rechargeable battery cell is
displayed in Milli-Ohm (mΩ).
"CURRENT" button
The "CURRENT" button permits setting of the charge and discharge current. Each push will
switch the display.
"SLOT" button
The "SLOT" button selects the current charging slot. Each push will switch the display (slot 1,
2, 3, 4, 1-4, end).
It is also used to confirm "MODE" and "CURRENT" parameter settings and ends the settings.
30
Possible rechargeable battery
programmes
Charging (CHARGE)
Discharging (DISCHARGE)
Test (CHARGE/DISCHARGE TEST)
Charging (CHARGE)
Discharging (DISCHARGE)
Test (CHARGE/DISCHARGE TEST)
Charging (CHARGE)
Test (CHARGE/DISCHARGE TEST)
Test (CHARGE/DISCHARGE TEST)
Quick test (QUICK TEST)
Quick test (QUICK TEST)
This parameter is set permanently.
The display is not switched with the
"DISPLAY" button.