Care And Cleaning; Guarantee - Waeco MagicSafe MS-670 Bedienungsanleitung

_MS-670.book Seite 52 Donnerstag, 8. Mai 2008 4:55 16

Care and cleaning

I
Note
If the ultrasonic sensors are set too sensitively, the alarm may be
triggered by passing vehicles. For this reason set the sensitivity
carefully and not too high.
To find the right setting, proceed as follows:
➤ Deactivate the alarm system (see chapter "Deactivating MagicSafe" on
page 50).
➤ Open the front side window about 20 cm.
➤ Activate the alarm system with the doors, bonnet and boot closed.
➤ Move an object into the vehicle interior from outside:
– If an alarm is triggered before you move the object into the vehicle,
reduce the sensitivity.
– If no alarm is triggered, increase the sensitivity.
10 Care and cleaning
a Caution
Do not use any sharp or hard objects for cleaning since they may
damage the device.
➤ Occasionally clean the device with a damp cloth.
11

Guarantee

The statutory warranty period applies. If the product is defective, please
return it to the WAECO location in your country (see the back of the
instruction manual for the address) or to your dealer. For repair and
guarantee processing, please include the following documents when you
send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
52
MagicSafe MS670