Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
4
Installation
8
Siemens Building Technologies
Fire Safety & Security Products
The reader AR6111-MX is designed to be wall-mounted with or without a 60 mm
flush-mounting box (DIN 49073, hole spacing 60 mm).
The reader should not be mounted directly onto conductive materials, such as
metal surfaces, metal frames (reinforcement) or metal-plated surfaces, as these
surfaces will reduce the reader's range. The clearance to such surfaces should
be at least 3 cm.
The lateral distance between the ID card readers and electro-conductive
materials like metals and metallized surfaces, must be at least 30 cm.
The distance between readers of the same design should not be less than
50 cm.
Before final installation, the planned installation site should be checked for
suitability.
Direction of the bottom section: "TOP
Fig. 1
Installation direction
" point upwards!
12.2005
Werbung
Inhaltsverzeichnis
