Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Firmware update
6.3.4
Verifying the firmware
6.3.5
Exiting the Bootloader
24
Siemens Building Technologies
Fire Safety & Security Products
"VERIFY" command
In order to ensure that no errors have occurred when programming the new
firmware the "VERIFY" command can be used to compare the programmed
firmware to the mhx file.
Enter the "VERIFY" command and press the "Send" button to select the mhx file
again.
The procedure was successful when the OK message appears.
"RESET" command
The Bootloader can be exited with the "RESET" command. After entering "RESET"
the reader performs a reset.
12.2005
Werbung
Inhaltsverzeichnis
