Calculate - COSINUS ESCORT 3145A Bedienungsanleitung

ESCORT 3145A / 3146A
display reading as the relative base.
Parameter : <Boolean> ( 0n,1; off,0 )
CALCulate:RELative:BASE
Description : Meter enters the relative calculation mode. Auto-ranging is disabled.
Parameter : <numeric value> is a six-digit number ; Relative base: -199999 to
+199999.
Example : CALC:REL:BASE 123456 ; Set the relative base to 123456.
Notes: The least setting digit is blank on the display of meter for fast mode. To set
least setting digit to "0" for fast mode as necessary.
CALCulate:LIMit[:STAT]
Description : Enable or disable the comparator mode.
Parameter : <Boolean> ( 0n,1; off,0 )

CALCulate

:LIMit
:UPPer [:DATA]
:LOWer [:DATA]
Description : Set the compare limits values ( upper and lower limit value).
Parameter : <numeric value> is a six-digit number; For value range : -199999 to
+199999.
Example : CALC:UPP 123456
CALC:LOW -123456
Notes: The least setting digit is blank on the display of meter for fast mode. To set
least setting digit to "0" for fast mode as necessary.
CALCulate:LIMit:FAIL?
Description : Return the compare result.
Response : 1 (HI ) , 0 (PASS ). -1 (LO).
CALCulate
:RECord
:MAXimum
:MINimum
:MINMAX
Description : Set the dynamic recording mode. The dynamic recording mode causes
Cosinus Computermesstechnik GmbH • Tel. 089-665594-0 • www.cosinus.de
<numeric value>
<Boolean>
<numeric value>
<numeric value>
; Set the upper limit value to 123456
; Set the lower limit value to -123456
Seite 7-97