Tabelle 17: Descriptions For S2 Command - COSINUS ESCORT 3145A Bedienungsanleitung

Seite 6-68
Command
<x> is an optional parameter for specifying a reading rate. It is defined
If <x> parameter is not specified, the meter will remain on its current
Table 6-6 shows all available S2 command parameters and available
Example 1: "S204S" (<f>, <r> and <x> are all specified)
Example 2: "S242"
Example 3: "S27"

Tabelle 17: Descriptions for S2 Command

Parameter
Function
Vdc
Vac
Ω/2-wire
Ω/4-wire
Adc
Cosinus Computermesstechnik GmbH • Tel. 089-665594-0 • www.cosinus.de
by a character "S", "M", or "F", in which "S" is for slow rate, "M"
for medium rate, and "F" for fast rate
reading rate without change.
combinations.
Set secondary display of the meter to DC V 120V with manual range
and at slow reading rate.
(<x> is omitted)
Set secondary display to DC A 120mA with manual range and the
reading rate will not be affected.
(Both <r> and <x> are omitted)
Set secondary display to frequency with auto-ranging and the
reading rate will not be affected.
S1 S2
<r>
<f>
0
1
2
0
3
4
5
0
1
2
1
3
4
5
0
1
2
2
3
(1)
N/A
4
5
3
6
7
0
4
1
Description
<x> =
S (Slow) M (Medium)
Auto range
120mV
1.2V
12V
120V
1000V
Auto range
120mV
1.2V
12V
120V
750V
Auto range
120Ω
1.2kΩ
12kΩ
120kΩ
1.2MΩ
12MΩ
120MΩ
Auto range
12mA
ESCORT 3145A / 3146A
F (Fast)
Auto range
400mV
4V
40V
400V
1000V
Auto range
400mV
4V
40V
400V
750V
Auto range
400Ω
4kΩ
40kΩ
400kΩ
4MΩ
40MΩ
300MΩ
Auto range
40mA