COSINUS ESCORT 3145A Bedienungsanleitung Seite 95

ESCORT 3145A / 3146A
function.
the measurement range.
SCPI <channel_list> syntax. Use @1 to select the primary display
function, and @2 to select the secondary display function.
Parameter : <numeric value>
Hz.
[ [ ,@1] | ,@2 ]
Example : CONF:FREQ 1.2E+4
range.
CONF:FREQ
CONFigure[:SCALar]:RESistance
Description : Set the primary display to 2-wire or 4-wire resistance measurement
function. The <numeric value> parameter is used to configure the
measurement range.
Parameter : <numeric value> ; For resistance range : 120, 400, 1200, 4000, 1.2E+4,
Example : CONF:RES 1.2E+4 ; Set the primary display to resistance 12kΩ range.
CONFigure]
[:SCALar]
:FUNCtion? [
Description : Return the measurement function. Use @1 to select the primary display
function, and @2 to select the secondary display function.
<literal> format ; Return the type string :
Response :
1. DC V ( DC voltage function )
2. AC V ( AC voltage function )
3. AC+DC V
4. DC A ( DC current function )
5. AC A ( AC current function )
6. AC+DC A
7. Hz ( Frequency function )
8. RES2W
Cosinus Computermesstechnik GmbH • Tel. 089-665594-0 • www.cosinus.de
The <numeric value> parameter is used to configure
;For frequency range : 1200, 1.2E+4, 1.2E+5, 1E+6
;For the primary and secondary display setting.
;Set the primary display to frequency 12KHz
1200,@2 ;Set the secondary display to frequency 1200Hz range.
[:2W]
:4W
4E+4, 1.2E+5, 4E+5, 1.2E+6, 4E+6, 1.2E+7, 4E+7,
1.2E+8, 3E+8
[ ,@1] | ,@2 ]
( Resistance 2-wire function )
[ [@1] | ,@2 ] has the same syntax as
[<
numeric value>]
[<
numeric value>]
( AC+DC volts coupling mode )
( AC+DC volts coupling mode )
Seite 7-93