Carrying Out A Rehearsal; Selecting The Country - AKG DMS800 Bedienungsanleitung

oPerAting instructions
REHEARSAL
Selecting the
country
DMS800 MANUAL
To program the transmitter to the receiver settings, follow the QUICK
SETUP steps up to point 10.
8.4

Carrying out a REHEARSAL

To carry out a REHEARSAL, proceed as follows:
Step Description
1 Switch on the receiver
2 Select the REHEARSAL menu; to do this, turn the SELECT
wheel to the right
3 Switch on synchronized transmitter
4 Start REHEARSAL; to do this, press SELECT twice
The display shows the receive signal level and the time ad‑
vance in graphic form.
5 Exit the action area with transmitter
6 Mark individual positions; to do this, press the MUTE button
on the transmitter
The corresponding marks will appear on the receiver display.
Note that the receive level should never drop below ‑85 dBm.
Reception can be improved by changing the position of the
receiver antenna.
7 Move the graphic to the left or right by turning the SELECT
wheel
Enlarge the graphic by pressing the SELECT wheel
8.5

Selecting the country

Use the frequencies of the sets preprogrammed for your country. However,
ensure that you have the license for the transmission frequencies of the
country, if required.
To select the country, proceed as follows:
Step Description
1 Switch on the receiver
86