Metz MECABLITZ 34 CS-2 digital Bedienungsanleitung Seite 74

Troubleshooting hints - After-sales service
Soluzione di problemi, servizio assistenza
Fallos y Soluciones, Servicio al Cliente
74
When the mecablitz is used as a SLAVE unit in
conjunction with a digital camera, all pictures
will be underexposed, irrespective of the setting
of the operating mode selector
• The digital camera probably operates with measuring
preflash >>> set the SLAVE function selector
tion 2.
If the mecablitz still does not function in spite of
all these checks, then:
• Turn off the flash unit by its main switch
while, and then turn on again.
Should the mecablitz still not operate properly then consult
an authorised Metz dealer.
:
to posi-
, wait for a