Choose A Station; Automatic Station Scanning With Auto-Store Function; Manually Scanning For Stations - Silvercrest SWEP 500 A1 - IAN 107035 Bedienungsanleitung

SilverCrest SWED 500 A1

Choose a station

In order to achieve the best possible signal, pull out the telescopic aerial (1) to
its maximum length. The telescopic aerial (1) can be rotated. In this way, the
reception can be optimised.

Automatic station scanning with auto-store function

The most convenient way of searching for and saving stations is the automatic
station scanning function with automatic channel saving (auto-store function).
 Switch the device on.
 Next, choose the desired frequency band by pressing the 'BAND' button (9).
 Press the 'TIME/MEM' button (8) for about one second to start automatically
scanning for stations. Automatic station scanning always begins with the
lowest frequency. 'PRESET' (24) is displayed on the screen.
 The multi-band radio (A) will now scan the entire frequency range for
stations with a strong signal. As soon as a station with a strong signal is
found, the memory location (35) that it is stored in will be displayed on the
screen.
 The first 100 stations found will be stored and saved straight to memory
locations 001 to 100.
When all 100 memory locations are full, the scanning will continue until
completion but no further stations will be saved.
Please note this will overwrite memory locations that are already in
use.

Manually scanning for stations:

 Switch the device on.
 Next, choose the desired frequency band by pressing the 'BAND' button (9).
28 - English