Setting The Reception Sensitivity; Selecting A Station; Automatic Station Scan With Auto Store Function - Silvercrest SWED 100B1 - IAN 274010 Bedienungsanleitung

SilverCrest SWED 100 B1
confirmed the volume warning in advance by briefly pressing the
"LOCK" button (9).

Setting the reception sensitivity

Slide the "DX/LOCAL" switch (17) to the "DX" position if you would like to
use the device in normal operation.
Slide the "DX/LOCAL" switch (17) to the "LOCAL" position if only stations
with a high field strength are to be received. This is recommended, for
example, if a desired weak local station is superimposed by stronger
national channels.

Selecting a station

To ensure the best possible reception, pull out the telescopic aerial (1)
completely before tuning. The telescopic aerial (1) can be rotated. You
can optimise the reception in this manner.
The shortwave band "SW" is divided into 9 sub-bands "SW1" to "SW9"
(see chapter "Technical data"). To select the individual sub-bands, first
press the "BAND" button (11) and select the "SW" band. Now press the
"BAND" button (11) for approximately two seconds until the "SW" symbol
flashes on the display. You can then use the "UP" (6) or "DOWN" (14)
buttons to select the "SW" sub-bands. When the "SW" symbol on the
display (7) stops flashing, you can continue with the station scanning.

Automatic station scan with auto store function

The most convenient way to search for stations and save them is the
automatic station scan with automatic saving of stations (auto store
function).
 Turn the device on.
 First, select the desired frequency band with the "BAND" button (11).
52 - English