Playback; Playing A Source - Yamaha A-670 Bedienungsanleitung

Playing a source

1
A
Press the (power) button on the front panel to turn on the unit.
You can also turn on the unit by pressing the
of the connected network CD player if the SYSTEM jacks of the network CD player
and of the unit are connected to each other.
The unit is turned on by interlocking with the network CD player (+page 10).
2
Select the input source on the network CD player and play the source.
3
Rotate the VOLUME control on the front panel to adjust the volume.
You can also adjust the volume by pressing VOLUME +/– buttons on the remote
control of the connected network CD player if the SYSTEM jacks of the network CD
player and of the unit are connected to each other.
4
When finished listening, press
set the unit to standby mode.
VOLUME
A
(power) button on the remote control
A
(power) button on the front panel to

PLAYBACK

PLAYBACK
Auto power standby function
• The auto power standby function will be activated as follows (default setting).
- The unit turn off automatically if no operation has been performed for more than 8 hours.
Activating/deactivating the auto power standby function
1 While pressing and holding
AC outlet.
2 Keep pressing A (power).
• The auto power standby function switches and the power indicator blink as follows:
- Auto power standby function is activated: blink twice
- Auto power standby function is deactivated: blink once
Notes
• If the SYSTEM jacks of the network CD player and the unit are connected to each other, and the
network CD player is turned on, the unit operates interlocking with auto power standby function
of the network CD player.
A (power) on the unit, plug in the power cable to the
7
En