Connecting The Ac Power Cable; Notes About The Remote Control; Remote Control Operation Range; Battery Installation - Yamaha YST-SW1500 Bedienungsanleitung

(U.S.A. model)
(U.K. model)

NOTES ABOUT THE REMOTE CONTROL

Battery installation

2

Battery replacement

If you find that the remote control must be used closer to
the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
● Use only AA, R6, UM-3 batteries for replacement.
● Be sure the polarities are correct. (See the illustration
inside the battery compartment.)
● Remove the batteries if the remote control will not be
used for an extended period of time.
● If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in contact
with clothing, etc. Clean the battery compartment
thoroughly before installing new batteries.

Connecting the AC power cable

POWER
ON
OFF
AC IN
To AC outlet
POWER
ON
OFF
AC IN
To AC outlet
3
1
<
U.S.A., Canada, Europe and Korean models
When all connections are completed, plug the included
power cable into the AC IN socket of the subwoofer, and
then plug in the power cable to the wall outlet.
Notes
● Never connect any power cable other than the included
one to the subwoofer. Otherwise, it may result in causing
fire or an electrical shock.
● Do not connect the included power cable to any other unit
than this subwoofer.
<
U.K. and Australia models
Plug in the subwoofer to the wall outlet.

Remote control operation range

Remote control
sensor
Notes
● There should be no large obstacles between the remote
control and the main unit.
● If the remote control sensor is directly illuminated by
strong lighting (especially an inverter type of fluorescent
lamp etc.), it might cause the remote control not to work
correctly. In this case, reposition the main unit to avoid
direct lighting.
>
>
Within approximately
6 m (20 feet)
11
E-