Connecting A Dvd Player/Recorder - Yamaha HTY-7040 Bedienungsanleitung

Connections

Connecting a DVD player/recorder

For audio connection, connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL
DIGITAL IN jack on this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog
audio output jacks on your DVD/VCR combo player/recorder to the AUX 1 AUDIO IN jacks on this unit in addition to
the coaxial digital audio connection.
For video connection, connect the video output jack of your DVD player/recorder to the DVD/AUX 2 VIDEO IN jack of
this unit. If your DVD player/recorder has component video output jacks, connect the component video output jacks of
your DVD player/recorder to the DVD/AUX 2 COMPONENT VIDEO IN jacks of this unit. Once the component video
connection is made, you can enjoy images with better resolution.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 21).
Notes
• Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system
settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder.
• If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead (see
page 28).
FM75
UNBAL.
COMPONENT
STB
*1
You can only make
*1
either a composite
or a component
connection.
output
Video signal to the TV
Video pin cable
Component video pin cable
24
En
ANTENNA
SUBWOOFER
COMPONENT
DVD/AUX 2
VIDEO IN
*1
Video Component
video output
DVD player/recorder
Video
AUX 1 TV/STB AUX 1
AUDIO IN
*2
For the DVD/
*2
*2
VCR combo
player/recorder
connection
R
Video Analog
output audio
output
Audio pin cable
Digital audio pin cable
Rear panel of this unit
DVD
COAXIAL
OPTICAL
TV/STB
DIGITAL IN
L
Audio
AUX 2
AUX 1
Coaxial
digital
output