Operation - Candy cdv 160 Reverse Action Gebrauchsanweisung

40001705English.fm Page 9 Tuesday, July 6, 2004 4:17 PM

Operation

1. Open the door and load the drum with
laundry. Ensure that garments do not
hinder closure of the door.
2. If drying delicate items press the
'DELICATES' button to reduce the
heat level. Press again on completion,
to select high temperature.
HIGH Heat setting
LOWLOW Heat setting
3. Turn 'DRYING TIME' dial until the
required drying time aligns with the
symbol .
The PRE-IRONING setting shown by
the symbol on the 'DRYING
TIME' dial provides a conditioning and
anti-crease function. The dryer will
heat the load for 8 minutes followed by
a 2 minute cool down period and is
especially good for garments which
may have been left for some time prior
to ironing, in a linen basket for
example. Garments may also become
stiffened when dried outside on a
washing line or inside on radiators. The
PRE-IRONING process relaxes the
creases in the fabric making ironing
quicker and easier.
4. Gently close the door pushing it slowly
until you hear the door 'click' shut.
5. Press the 'ON' button. The indicator
will light and the drying cycle begins.
6. The load is dried by tumbling in
thermostatically controlled warm air.
Cool air is used for the last 10 minutes
to reduce creasing and cool the load
ready for handling.
7. When the program is fully completed
the drum will stop rotating and the dial
will point to the symbol
Open the door and remove the load.
WARNING!
THE DRUM, DOOR AND LOAD
MAY BE VERY HOT.
8. Clean the filter after every drying cycle
to ensure maximum dryer efficiency.
(See 'Filter' section.)
ENGLISH
.
9