Installation - AEG S72300DSW0 Benutzerhandbuch

INSTALLATION

WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
POSITIONING
This appliance can be installed in a dry,
well ventilated indoor (garage or cellar) al-
so, but for optimum performance install
this appliance at a location where the am-
bient temperature corresponds to the cli-
REAR SPACERS
LEVELLING
2
1
45°
A
45°
2
mate class indicated on the rating plate of
the appliance:
Cli- Ambient temperature
mate
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
In the bag with the documentation, there
are two spacers which must be fitted as
shown in the figure.
1. Fit the spacers into the holes. Make
sure that the arrow (A) is positioned
as shown in the picture
2. Turn counter-clockwise the spacers
through 45° until they lock into place.
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
ENGLISH
37