Acoustic Signals; Before First Use; Daily Use; Loading The Laundry - Electrolux EWF 1484 EDW Benutzerinformation

12 www.electrolux.com
• Before you press
cannot start.
8.2 Permanent Extra Rinse
With this option you can permanently have
an extra rinse when you set a new
programme.
• To activate/deactivate this option
press
until the indicator
off.

8.3 Acoustic signals

The acoustic signals operate when:

9. BEFORE FIRST USE

1. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
2. Put a small quantity of detergent in the
compartment for washing phase.
3. Set and start a programme for cotton
at the highest temperature without
laundry.

10. DAILY USE

WARNING!
Refer to Safety chapters.

10.1 Loading the laundry

1. Open the appliance door
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry in
the drum.
4. Close the door.
: the appliance
and at the same time
comes on/goes
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press
time for 6 seconds.
If you deactivate the acoustic
signals, they continue operate
when the appliance has a
malfunction.
This removes all possible dirt from the
drum and the tub.
CAUTION!
Make sure that no laundry stays between
the seal and the door. There is a risk of
water leakage or damage to the laundry.
and at the same